Blog, Solar thermal, White Paper

7 Reasons to consider Roof Top Solar Thermal than Solar PV

  Solar Energy is most often implied as Solar Photovoltaic Energy with electric energy as the output.Solar thermal energy is not as predominant in the Solar Renewable energy scenario as Solar PV. Let us consider the current scenario around the world.  The total Solar Thermal Capacity being utilised in the world currently is 465 GigaWatts. This mostly is accounted by small scale and household utilisation. This, when compared to the solar photovoltaic base capacity installed – around 303 GW – is more than 50 percent higher.        Having said that, the industrial utilisation of Solar Heating systems remains paltry. 100 Million Tonnes of Oil is used in Industries for heating applications of which 15 million tonnes are used for below 250°C applications. This amounts to around 93 GW Solar Potential for under 250°C and approximately 20GW potential for under 100°C applications   This is huge in terms of unharnessed solar energy, potentially saving millions of rupees and carbon emissions. We shall now look into this disparity in terms of pragmatic factors.   The cost of Solar Thermal Solutions is more than 1 to 2 crores cheaper for every MW generated using Solar Power technologies. Space occupied by a solar heater is  3000 sq. m whereas 1 MW solar PV takes about 10000 sq. m.. Energy produced by solar heaters in a year also is often more than Solar PV. Why then is  Solar PV still more prevalent?     The reasons vary from low awareness on the potential Solar heating Technologies to the unappealing nature of  Solar Thermal Systems to Low Media coverage on its success.   With governments focusing on more and more sustainable energy solutions these forms also deserve the same attention, if not better, than the usual renewable energy solutions.   In the following series of blog posts posted every Thursday, we shall look into the 7 factors that make Solar thermal Solutions more feasible than Solar Photovoltaic systems and study the processes of implementing these systems.        

Blog, Case Studies

Aspiration Energy conferred the Climate Solver Award for 2013

The world is currently addressing the imminent threat of climate change, renewable energy systems are thriving, and governments are bringing in more and more initiatives to mitigate greenhouse gases.Climate Solver Award is one such initiative by The World Wide Fund in association with the Government of India, and other stakeholders like innovation incubators, industrial associations and business networks that play an important role in helping and supporting climate innovation solutions.The Wild Life Fund awards small to medium scale enterprises for their potential to produce renewable energy technologies that reduce the carbon emissions. More details about the award can be found here.      Aspiration Energy, a sustainable industrial heating solutions provider, was awarded the Climate Solver Award in the year 2013 for executing eight commercial scale solar thermal installations for industrial process heat projects equivalent to 1 MW.     The scale and numbers have since drastically increased with the company now saving around 1000 MW of energy.Also, carbon emissions, around 2.5 Megatonnes, and energy savings amounting to nearly 4 Crores have been prevented owing to the projects running under Aspiration energy.The projected savings, from the next 10 years, will be around 200 Million tonnes of carbon.It is this commitment towards sustainable industrial solutions that make it the leader in this industrial solar thermal sector in India.With a ‘more than happy’ client base from the savings given, cutting edge technology, and committed principle towards a better the future looks bright

Blog, Heat Pumps, Solar thermal

Accomplish decarbonizing with Heat Pump and Solar Thermal systems

Our energy system is extraordinarily carbon-intensive and highly polluting. Consider this. In 2013, only 3% of India’s primary energy demand (both electricity and thermal energy) was met by non-carbon sources (predominantly nuclear and renewables that do not include biomass) (Source: International Energy Agency). Fossil fuels account for 73% of the total source of energy, and biomass accounts for 24%. While biomass is considered a renewable energy source, it is still carbon-based and a polluting source. It goes without saying that unless the energy sources are decarbonized, there is no way for India to grow in a clean and greenway. It is true not only for India but also for the entire world. Countries across the globe are launching new initiatives to tackle global climate change, reducing pollution and improving quality of life by deploying technologies that can decarbonize energy. Global scenario One very specific and highly visible example is the Coal to Electricity program launched by the Chinese central and local governments to combat the high levels of air pollution and haze in China, especially Beijing, during winters. In December 2015, Beijing declared its first Air Quality Red Alert, as a result of the elevated smog within the city, and shut down schools and some industrial areas as a result of the air pollution levels. Widespread coal combustion for providing heat during winters is a major factor attributed to the high levels of air pollution during winter in Beijing. (New Delhi faces a similar problem, and in December 2016, Telegraph newspaper ran a story titled “ Pollution in Delhi hits new heights as tourists take smog selfies”). Under the Coal to Electricity program, the government mandated the replacement of coal-fired boilers by electrical heating devices like electric resistance-based heaters and Heat Pumps. The government gave about 90% subsidy on the capital equipment for the replacement of coal-based heating devices. According to the China Heat Pump Alliance, around 161,000 Heat Pumps were installed in 2016 in Beijing under the “Coal to Electricity” Programme and the Beijing government gave a subsidy of 5 Billion RMB for these Heat Pumps. This and the Chinese government\’s other programs are expected to reduce localized pollution due to decarbonization in cities like Beijing. While China’s decarbonization programs are implemented out of immediate needs, Europe, especially Germany, has been taking more proactive policy approaches. For example, Germany, as part of its Energiewende, has a national goal to increase the % of renewable heat to 14% by 2020. Towards that, “from January 1, 2016—construction of new buildings will only be permitted if they use energy generated from renewable sources for space and water heating. This includes the use of solar, solar thermal, biomass, efficient heat pumps, etc. Oil burners are completely banned as a means of heating new buildings.” More recently, during the last week of June 2017, several stakeholders in Europe come together to “launch two campaigns committed to ushering renewable and low-carbon energy to the forefront of Europe’s power landscape”. Both the campaigns – the Electrification Alliance and Make Power Clean – target the decarbonization of energy using renewable(solar/wind) energy generation(electricity) and promotion of renewable heat technologies like Heat Pumps and Solar Thermal(for heating requirements). According to the proponents of these initiatives, 30% of power in Europe comes from renewables, and this share is expected to touch 50% in a decade. Indian scenario As mentioned earlier, in India, energy is almost entirely carbon-based, across every sector. This is especially true in the case of the industry sector. The government of India has set ambitious targets for renewable energy – 100 GW Solar PV and 75 GW Wind installed capacity by 2022. However, more needs to be done to decarbonize the energy systems faster. That includes replacing fossil fuels with electricity generated using renewable sources, and by extracting and using renewable heat using technologies like Heat Pumps and Solar Thermal systems. Decarbonizing with Heat Pump and Solar Thermal systems Both the ambient heat extraction technologies – Heat Pumps and Solar Thermal systems – have been around for a long time, and are proven and mature from a technology perspective. (Details about how these technologies work can be found here(Heat Pumps) and here(Solar Thermal)). In industrial applications, Heat Pumps and Solar Thermal systems can be highly cost-effective with payback periods as low as 1 year depending on the capacity utilization. These applications have also helped reduce localized pollution for several of Aspiration Energy’s customers, and have led to a significant reduction in carbon footprint by decarbonizing the Heat sources. For example, in the case of one of our customers, we were able to demonstrate more than 50% savings in energy cost and about 50% reduction in CO2 emissions per year by switching to a Heat Pump, as below. Read the entire case study here. Similarly, one of our other customers was able to reduce about 20-25 tonnes of LPG per year by installing a 360 kW online rooftop solar thermal system. (Download the case study here). Conclusion Decarbonization of energy systems is critical for the environment and will have a significant positive bottom-line impact. Decarbonization of electricity by installing Solar and Wind power projects is well known, and it is now time to place more emphasis on decarbonizing Heat by deploying renewable thermal technologies like Heat Pumps and Solar Thermal systems. The climb is steep but would be well worth it.

Blog, Case Studies

Too Good To Be True – Heat Pump Case Study

\”Too Good to be True\” – That was the reaction of a leading global Trucks Manufacturer, when Aspiration Energy told that replacement of Electric Heaters with Heat Pump will reduce more than 50% of energy consumption for one of its Industrial processes. The Truck Manufacturer was skeptical about Heat Pumps and challenged Aspiration Energy to prove its claims about the energy savings. Aspiration Energy accepted the challenge, installed a Heat Pump at its own cost, and proved how Heat Pumps not only reduce energy consumption for the process by 80,000 kWh/year(53%), but also reduce the carbon foot print by 70,000 kg Co2/year. And the story has a happy ending. The Trucks Manufacturer has ordered more Heat Pumps for installation n some of its other sites. How did Aspiration Energy reduce electricity consumption and Carbon footprint? Download the case study here.

Blog

Certificate Program in Industrial Heating,September 23 & 24,2016 @ IIT Madras

Aspiration Energy and Indian Institute of Technology, Madras invite you to attend the \”Certificate program in solar heating & heat pumps for Industrial processes\” on September 23 & 24 (Friday & Saturday) at ICSR Building, Indian Institute of Technology, Madras. The heating process in Industries are the least monitored because energy professionals consider them as necessary evils and do not see an opportunity to increase efficiency and reduce cost. If you have a manufacturing process with temperature between 50 deg – 150 deg, this certificate program should be attended. The advantages of attending this program : Low Total Cost of Ownership Save money Low payback periods Cut CO2 emissions At the end of the Program, the participant will get a CEP (Certificate Education Program) issued by IIT, Madras. The registration includes a nominal fee of Rs. 5000/ (incl. of taxes) per participant. Kindly register to reserve your place. Only limited seats available! RSVP! Looking forward to meet you! Click here to register! PS: Snapshots of the certificate program held in Hosur on August 19 & 20 Best Regards, Deepa Rajagopal deepa@aspirationenergy.com  

Blog

ASPIRATION ENERGY 24×7 HOT WATER SOLUTIONS

Aspiration Energy, is a renewable energy services company, focused on Industrial Heating Applications (70-120°C) offering Solar Thermal and Industrial Heat pump solutions. Aspiration Energy has built robust solar heating systems that are even better than what is available in the market today. Aspiration Energy\’s Solar thermal hot water solution assures: constant delivery temperature throughout the day irrespective of the withdrawal rate, thermal energy measurement for accurate assessment of energy saving, unique tank design and circuit design where water is delivered to tank only after attaining the specified temperature up to 85°C. >> Fast Forward to the Solar future>> Aspiration Energy Private Limited || 044-42185301 www.aspirationenergy.com

Blog

Technical Meet on Industrial Thermal Technologies, Organized by FICCI

(Recent Advancements in Combustion Technology, Industrial Fuel Switching, Industrial Waste Heat Recovery – 1st & 2nd August 2016 Chennai) Thermal systems play a vital role in Industrial processes. Thermal energy losses in the processes industry is a significant issue due to heat intensive processes involved. Studies have estimated that as much as 20 to 50% of industrial energy consumption is ultimately discharged as waste heat. A comprehensive analysis of combustion system, viability & availability of fuel switching options and identification of waste heat recovery opportunities are imperative for our process industries to become more efficient. The global reduction in oil prices has created a possibility of fuel switching from solid fuel to oil or other fuels. In a given / existing combustion system, certain hardware and operational modifications are required. It is learnt from the recent Perform Achieve & Trade scheme of BEE, that thermal system has highest potentials for improvement to reduce overall plant specific energy consumption. \”Energy Efficient Technologies for Process Heating\” – Presentation by Satyanarayanan Seshadri, CTO,Aspiration Energy Keeping in view the requirement of Process Industries, FICCI organized a Technical Meet on “Recent Advancement in Industrial Thermal Technologies on during 1-2 August 2016 at Chennai. This technical meet addressed nationally & internationally available technologies, suitability & feasibility of various WHR systems, fuel switching aspects, efficient combustion technologies, O&M aspects, successful case studies, national & international technology providers etc. Technology providers, experts, academicians, consultants and end users shared their valuable experiences and knowledge during this technical meet. The broad objective of this technical meet is to: Learn about new technologies and best practices for Efficient Combustion, Fuel Switching, Learn about challenges, barriers, limitation, solutions in the adoption of these technologies Identify potential areas of energy loss and improvement opportunities for reduction in operating cost Develop confidence and increase the capability of plant personnel to equip with best practices in Thermal Engineering Help industries in terms of getting information regarding technology providers, consultants, Energy Efficient equipment etc

Scroll to Top